Hinriform
Kneadable twocomponent A-silicone with a greatly increased final setting Shore A hardness of > 90 after 24 hours. Mixing ratio of components A and B: 1 : 1. Very low shrinkage < 0.01%. Optimal working and hardening times according to requirements. Exact reproduction of detail. Cuts easily and is resistant to inorganic chemicals. Excellent mechanical properties after hardening.
2 x 1,5 kg Hinriform 90 x-hart, REF 793000
2 x 5,0 kg Hinriform 90 x-hart, REF 793001
Material Safety Data Sheet
+ 12 mixing tips
A-silicone for fabricating gingival masks. Hinriform® Gingiva is an A-silicone with a high Shore A hardness for fabricating of gingival masks in the direct application in the impression and the indirect fabrication technique on the model.
• High final Shore A hardness > 70, very strong tear resistance
• short vulcanisation time of 7-8 minutes easy to cut and grind
• cartridges are usable for all standard 50 ml dispenser systems
• applicable for the complete crown and bridge technique and implantology
+ 12 mixing tips
Same application as Hinriform® Gingiva but with reduced Shore A hardness of 40.
Service
ERNST HINRICHS Dental
Service-Hotline
+49 (0) 53 21 - 5 06 24
technicle Support
+49 (0) 53 21 - 33 49 584
Catalogue
Catalogue
New products
YouTube-Channel
