Vertical groove structure on the inside of the ring increases the surface area. Setting expansion is not affected, ensuring an optimum fit of the casting. Use of a silicone sleeve ensures a more uniform heat uptake and controlled cooling of the mould. The whole span of the pattern can be placed at the same distance from the mould wall, optimising the fit of the casting.

size:

Silicone sleeves size 0 (ø 70 mm x 55 mm) REF 892017
Silicone sleeves size 1 (ø 75 mm x 60 mm) REF 892003
Silicone sleeves size 2 (ø 80 mm x 65 mm) REF 892004
Silicone sleeves size 3 (ø 90 mm x 75 mm) REF 892005

with sprue former

For CrCo and ringless direct-wax investing with the model-shaped silicone sleeve.

size:

Model-shapedbase plate size 0, REF 892018
Model-shapedbase plate size 1, REF 892019
Model-shapedbase plate size 2, REF 892020
Model-shapedbase plate size 3, REF 892021

without sprue former

For CrCo and ringless direct-wax investing with the model-shaped silicone sleeve.

size:

Model-shapedbase plate size 0, REF 892022
Model-shapedbase plate size 1, REF 892006
Model-shapedbase plate size 2, REF 892007
Model-shapedbase plate size 3, REF 892023

Residue-free adhesive for use with preformed wax patterns on unhardened ERNST HINRICHS CrCo investment duplicate models. The wax adhesive should be applied thinly to ensure retention of the patterns on the duplicate model.

Wax adhesive, 30 ml / REF 892030
Wax adhesive, 100 ml / REF 892031

• No preheating of the plunger!
• Easy to handle
• no more time-consuming divesting of reusable plungers
• No micro cracks in the sprues
• suitable for all pressable ceramic systems

Available in 2 diameters: Ø 12 mm (e.g. Empress®/Ivoclar) and Ø 13 mm (e. g. e.max®/Ivoclar).

size:

50 Stück à Ø 12 mm, REF 892061
50 Stück à Ø 13 mm, REF 892063

Manufactured from high purity aluminium oxide, reusable many times, no micro cracks in the sprues, suitable for all pressable ceramic systems.


size:

Plunger Aluoxid Ø 12,00 mm, 2 pcs.
REF 892060

Muffle system for silicones sleeves Ceram (for lithium disilicates press systems), available in 2 sizes.
Each set contains 3 mould bases and 3 mould gauges.
 

For a well known press-ceramic systems (e.g. Degudent, Ivoclar).
The corrugated effect of the muffle surface area will regulate the solidification of the
ceramic. Easy handling.

Silicone sleeve ceram 100 (100g), REF 892010
Silicone sleeve ceram 200 (200g), REF 892011

 

For economic, direct investing with the model base plate for crown and bridge work. Vertical groove structure on the inside of the ring increases the surface area. Setting expansion is not affected, ensuring an optimum fit of the casting. Use of a silicone sleeve ensures a more uniform heat uptake and controlled cooling of the mould. Sprue formers are supplied with these silicone sleeves in sizes 3, 6 and 9.

size:

silicone sleeves size 3, Ø inner: 45 mm / REF 892040
silicone sleeves size 6, Ø inner: 62 mm / REF 892041
silicone sleeves size 9, Ø inner: 75 mm / REF 892042

For economic, direct investing with the model base plate for crown and bridge work. Vertical groove structure on the inside of the ring increases the surface area. Setting expansion is not affected, ensuring an optimum fit of the casting. Use of a silicone sleeve ensures a more uniform heat uptake and controlled cooling of the mould. Sprue formers are supplied with these silicone sleeves in sizes 3, 6 and 9.

size:

casting mould base size 3, REF 892050
casting mould base size 6, REF 892051
casting mould base size 9, REF 892052

Adhesive disposable ring tape for use when investing CrCo.

The surface area of the investment mould’s outer surface is increased considerably due to the corrugated effect of the ring material. This increases the amount of heat absorbed during burnout. The diameter of the mould is no greater than that of the duplicate model. This saves investment and space within the furnace.

Disposable ring tape, 25 m
REF 892001

Made from flexible injection-molded plastic for multiple use as a sprue-former in CrCo rings.

Sprue formers, pack of 100
REF 892036